Luxury Car Detailing recently completed a full mobile detail and ceramic coating application on a Toyota Avalon TRD in Supersonic Red. The vehicle, which features aggressive black trim, performance wheels, and a gloss black roof, was parked under trees and showed signs of pollen buildup, sap, and light hazing across the paint.
This job wasn’t just about cleaning—it was about prepping the surface to perfection and locking in the finish with a high-quality ceramic coating that offers long-term protection and gloss retention. The service was completed entirely on-site at the client’s home in Rhode Island.
Initial Assessment and Client Goals
- Noted light surface contamination, tree sap, and water spots across the hood and roof
- Black trim, gloss roof, and wheels needed special care to avoid scratching and staining
- Paint had light swirl marks and dullness from frequent outdoor exposure
- Interior was lightly used but had dust, debris in hard-to-reach areas, and minor buildup on touchpoints
- Client requested a full ceramic coating, wheel treatment, and interior refresh without over-glossing
Exterior Prep & Ceramic Coating Process
1. Foam Wash and Decontamination
- Rinsed vehicle thoroughly to remove loose pollen and debris
- Applied foam pre-soak with pH-neutral soap to break down organic matter and lubricate the surface
- Used two-bucket hand wash to safely clean all body panels, wheels, trim, and aero pieces
- Cleaned inner wheel barrels, lug nut areas, and behind spokes
2. Chemical & Mechanical Decontamination
- Sprayed iron remover to dissolve brake dust and metallic particles
- Clayed all painted and glass surfaces to remove bonded contaminants and sap residue
- Dried with microfiber towels and compressed air, prepping for polish
3. Paint Enhancement Polish
- Conducted a single-stage polish to enhance gloss and remove micro-marring
- Focused on high-visibility areas like the hood, roof, trunk, and door panels
- Gloss black roof and mirrors polished with a soft pad to avoid swirl marks
4. Surface Prep for Coating
- Wiped down all painted surfaces with panel wipe to remove oils and polishing residue
- Masked off rubber trim and badges to avoid coating overlap
- Performed final inspection under direct light before application
5. Ceramic Coating Application
- Applied professional-grade ceramic coating by hand in controlled sections
- Used cross-hatch technique to ensure even coverage
- Waited for appropriate flash time before leveling with microfiber towels
- Coated all painted surfaces, gloss trim, headlights, and taillights
- Applied dedicated coating to wheels and plastic trim for full protection package
6. Post-Curing and Final Touches
- Let vehicle cure under shade with no exposure to water for recommended initial bonding period
- Performed final inspection with lighting to check for high spots and streaks
- Provided aftercare instructions to client for proper maintenance and washing going forward
Interior Detailing Process
1. Dry Debris Removal
- Full vacuum of carpets, mats, under seats, and trunk
- Compressed air used to purge dust from vents, buttons, and seat rails
2. Interior Surface Cleaning
- Wiped down dashboard, center console, cupholders, and controls
- Brushed around TRD badging, drive mode buttons, and screen bezels
- Used interior-safe cleaner on gloss black and satin surfaces
3. Seat and Door Panel Treatment
- Cleaned leather-trimmed sport seats with leather-safe cleaner
- Conditioned seats with a matte finish protectant
- Door panels and thresholds wiped down to remove scuffs and road film
4. Glass & Finishing Touches
- Cleaned all interior glass streak-free
- Deodorized cabin with a subtle, fresh scent
- Final microfiber wipe-down before returning vehicle to client
Results
- Supersonic Red paint showed extreme clarity and richness with deep reflections
- Gloss black roof, trim, and aero accents had a uniform, swirl-free finish
- Wheels looked freshly coated and brake dust-resistant
- All interior surfaces were dry, clean, and untouched by residue
- Client remarked that the car looked “better than brand new” and was excited about the ease of maintenance thanks to the ceramic protection
What Was Performed
Exterior Services:
- Foam cannon wash
- Iron and sap decontamination
- Clay bar treatment
- Single-stage polish for gloss and clarity
- Full vehicle wipe down and ceramic coating
- Coated paint, trim, lights, and wheels
- Exterior glass cleaned and treated
Interior Services:
- Vacuum and compressed air detailing
- Surface cleaning and panel wipe
- Leather cleaned and conditioned
- Interior glass polished
- Deodorizing treatment
Why Ceramic Coating Matters
This Avalon TRD’s Supersonic Red finish is stunning—but only when properly protected. The ceramic coating applied will provide:
- Long-lasting hydrophobic protection
- Easier washing and less need for waxing
- Resistance to UV fading, chemical stains, and minor scratches
- Extended lifespan of the car’s finish and improved resale value
Final Thoughts
This detail showcases the full value of Luxury Car Detailing’s mobile ceramic coating service. By handling everything at the client’s home, we made the process convenient while delivering premium results typically only found at high-end shops. Whether it’s a performance sedan, a luxury SUV, or a weekend driver, our mobile service brings professional results directly to your driveway.